[Kratos] Nelson

Janosch Stascheit janosch.stascheit en rub.de
Mie Abr 18 13:08:01 CEST 2012

Hi Nelson,

this behaviour is intended since inactive elements should not appear in
visualisation. This is implemented in GidMeshContainer, where inactive
elelemts are excluded from being printed.

If you don't want this, you should use another variable to indicate an
element as 'inactive' but still 'available'. But then you also have to
change the builder_and_solver.

Another option would be to add an additional variable like
VISUALIZE_WHEN_INACTIVE and check for this in addition during writing
the mesh.

Best regards

Am Mittwoch, den 18.04.2012, 11:43 +0200 schrieb Nelson Lafontaine:
> Hi people,
> I have a problem:
> when i set the element with the GetValue(IS_INACTIVE)=true
> the element desapears from the model when is visualized in Gid
> sofware.
> There are some function that do this?... because i do not want this
> results.
> Thanks
> -- 
> Ing. Nelson M. Lafontaine
> _______________________________________________
> Kratos mailing list
> Kratos en listas.cimne.upc.edu
> http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/kratos

Más información sobre la lista de distribución Kratos